Kongsberg Automotive Parts Dammam
Kongsberg Automotive makes a wide range of components for commercial vehicles that fall outside the more obvious engine and brake categories: cabin comfort systems such as seat and cab suspension, driveline components including gear shift systems and couplings, and fluid-handling parts such as hoses, quick connectors and fittings used across fuel, air and hydraulic lines.
OZwheel sources and supplies Kongsberg Automotive components for fleets and workshops around Dammam. Whether a driver's seat has lost its damping, a gear shift linkage feels loose, or a hose fitting has started weeping, send the truck's details and a photo on WhatsApp and we will confirm what we can supply.
These are also the parts that fleets tend to defer, since none of them stop a truck from running. That is a mistake worth avoiding: a driver working a long shift in an uncomfortable seat or fighting a vague gear shift is more fatigued and less precise by the end of the day, and a weeping fitting on a fuel or air line rarely stays a small leak for long.
Cabin, driveline and fluid-handling parts Kongsberg Automotive is known for
The range covers three areas that are easy to overlook until they fail.
- Cabin comfort: driver and passenger seat suspension, cab air-suspension components and related mounts
- Driveline: gear shift systems, linkages and couplings that connect the driver's controls to the gearbox
- Fluid handling: hoses, quick connectors and fittings for fuel, air and hydraulic lines
Why these parts affect comfort and control, not just uptime
These parts do not carry engine loads directly, but their failure points affect driver comfort and control precision over a long shift. A seat that has lost damping leaves a driver fatigued on a long Riyadh run, a worn gear shift linkage makes it harder to find gears cleanly, and a degraded quick connector on an air or fuel line is a leak waiting to happen.
A quick connector is designed to seal reliably through repeated connection and disconnection, which matters wherever a line needs to be serviced regularly, but the seal inside it is still a wearing part. Once it hardens or takes a set from age and heat, it can leak at a joint that looked perfectly secure a year earlier, which is why a hose or fitting replacement is sometimes the answer even when nothing looks visibly damaged.
Which trucks use Kongsberg Automotive components
Kongsberg Automotive components are fitted across a wide range of the heavy trucks working in and around Dammam, usually as part of the cab and driveline assembly rather than as a headline spec.
- Mercedes-Benz Actros and Arocs trucks, for seat suspension and gear shift linkage components
- Volvo FH and FM trucks, for cab comfort and fluid-handling fittings
- MAN TGS and TGX trucks, for driveline shift components
- Sinotruk (CNHTC) HOWO trucks, where compatible equivalents cover seat and fitting needs
A photo plus the chassis number confirms fitment
Seat models and hose fitting sizes vary by cab trim level and model year, so a photo of the part alongside the chassis number is the quickest way for us to confirm a match.
Diagnosing a vague or notchy gear shift
A gear shift that feels vague, notchy or occasionally hard to select is often a worn external linkage or bushing rather than a fault inside the gearbox itself, and it is worth checking the external mechanism first since it is a far simpler repair. Look for play at the linkage joints and any perished or cracked bushings before assuming the problem sits deeper in the transmission.
Cabin and fitting wear from Dammam's heat and long shifts
Heat degrades rubber and plastic components faster than mechanical parts, so seat foam, air-suspension bellows and hose fittings on a truck working in Dammam's summer temperatures often need replacing sooner than the service manual's interval suggests. A cracked quick connector or a perished hose on a fuel or air line is a common source of a slow leak that is hard to trace until it is pointed out.
Drivers running long stretches of Highway 40 in full summer heat also feel seat and cab suspension wear more acutely, since a cab that transmits more road vibration adds fatigue on an already long, hot run.
Kongsberg Automotive parts questions from Dammam workshops
Can you supply a replacement driver's seat, or only the suspension parts?
We can quote seat suspension components and, depending on availability, full seat assemblies. Tell us the cab model and what has failed and we will confirm options.
How do I identify the right hose fitting size?
Send us a photo of the fitting with something for scale, along with where it sits on the truck (fuel, air or hydraulic line). A close-up of any markings on the fitting body helps most.
Is a loose gear shift linkage a Kongsberg part or a gearbox fault?
It can be either. Play in the external shift linkage is often a worn bushing or coupling that can be replaced without opening the gearbox, but a fault inside the gearbox itself needs different parts. Describe the symptom and we can help point you toward the likely cause.
Is OZwheel an authorized Kongsberg Automotive dealer?
No. OZwheel is an independent parts supplier and we source and supply Kongsberg Automotive components and compatible equivalents for the trucks our customers run.
A fitting looks fine but is still leaking. Why?
The internal seal inside a quick connector can harden and lose its grip with age and heat even when the fitting body shows no visible damage. If a joint keeps weeping after tightening, replacing the fitting itself is often the fix rather than continuing to re-tighten it.
Related parts and service pages
Pages worth checking if you are ordering cabin, driveline or fluid-handling parts.
- Clutch and gearbox parts for Dammam workshopsShift linkages and couplings
- Hydraulic components for Dammam trucksHoses, fittings and connectors
- Fuel system parts for Dammam trucksFuel line hoses and fittings
- Truck parts and workshops in DammamOur As Sinaiyah base and service area
Order Kongsberg Automotive parts on WhatsApp
Message +966 53 870 9021 with a photo of the part and the truck's chassis number, and we will confirm what we can supply.